Air-hardening PTFE bonded coating
FLUOROPAN T 20 Spray is a whitish-transparent, air-hardening bonded coating based on PTFE and an organic binder.
When FLUOROPAN T 20 Spray has been applied and hardened, it offers high wear resistance, a low friction coefficient and no stick slip at low speeds. Its adhesion on iron and non-ferrous metals and solvent-resistant plastics as well as wood is good.

Adhesive lubricant containing graphite
GRAFLOSCON CA 901 ULTRA, a solvent-containing mineral oil based adhesive lubricant with a high content of solids, is applied by spray can.
This spray is extremely adhesive, resistant to high pressure, and has good anti-corrosion properties.

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Air-drying, easy-to-apply bonded coating based on MoS₂
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS₂), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.

Anticorrosion lubricant for food and pharmaceutical industries
Kluberfood NH1 K 32 Spray is a transparent "grease like" anti corrosion protection film for the protection of ferrous metals. This special lubricant has been designed to comply with the particular requirements of the food-processing industry.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, pharmaceutical industries.