Special grease for long-term lubrication and high temperatures
AMBLYGON TA 15/2 is a long-term and high-temperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for long-term or lifetime lubrication in the machine-building sector covering a wide service temperature range up to 150°C. AMBLYGON TA 15/2 offers good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions.AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion.

Synthetic hydraulic oils for the food and pharmaceutical industries
Klüberfood 4 NH 1-15...100 oils are hydraulic oils based on synthetic hydrocarbons. Klüberfood NH 1 oils offer good oxidation stability due to the synthetic base oil, also good stability at low temperatures and protection against friction and wear. They meet HLP requirements acc. to DIN 51524 part 2.
Apart from their excellent corrosion stability, Klüberfood 4 NH 1 oils have a good water separation ability.

High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Kluber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Refrigeration oil especially for ammonia compressors in the food-processing industry
Kluber Summit RHT FG 68 based on highly refined and hydrogenated white oils especially for the lubrication of ammonia refrigeration compressors.
The hydrogenated base oil is chemically stable and was designed in particular to withstand the influence of ammonia. While conventional mineral oils tend to blacken when reacting with ammonia and deposits tend to form in the refrigeration circuit, this is not the case with Klüber Summit RHT FG 68. Oil change intervals can be extended significantly. Due to the low solubility in ammonia, Kluber Summit RHT FG 68 contributes to refrigeration efficiency. Experience has shown that Kluber Summit RHT FG 68 can be used with evaporator temperatures down to -33°C depending on the operating conditions. Kluber Summit RHT FG 68 meets the requirements of DIN 51 5031, KAA.
It is registered as NSF H1 and therefore complies with FDA 21 CFR 178.3570.