Lamora D 220

Manufacturer: KLÜBER LUBRICATION (Germany)

Lubricating oils for slideways and guideways
LAMORA D oils offer excellent lubricity also at low sliding speeds, enabling constant and precise feed motion of workpiece and tool slides. They ensure good wetting of the sliding surfaces and a high load-carrying capacity, especially of slideways with plastic coatings. Tests at SKC Schmidt GmbH & Co. (formerly Hans Schmidt Gleittechnik GmbH & Co.) have shown that the oils attain "good" to "very good" results both in terms of their coefficients of adhesion and their demulsifying behaviour in contact with customary cooling lubricants.
LAMORA D oils are in compliance with ISO 6743 part 13 GA and GB.

Benefits for your application

Prevent residue formation and stick-slip at low sliding speeds
- Good demulsifying behaviour towards water-miscible cooling lubricants
- Optimised coefficients of adhesion
- Good wetting and load-carrying capacity
Especially for slideways and guideways coated with plastic
Meet the requirements of CGLP oils acc. to DIN 51 502

Orther products

Product

Features, Application

Klubersynth GH 6-22...1500

Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Grafloscon C-SG 2000 Ultra

Operational lubricant for open drives
Grafloscon C-SG 2000 Ultra is a sprayable adhesive lubricant with a mineral base oil. It contains aluminium complex soap and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives, adhesion improvers and corrosion inhibitors. The raw materials used for the manufacture of Grafloscon C-SG 2000 Ultra are free of bitumen, solvents and chlorine.

Grafloscon C-SG 0 Ultra

Graphite based operational lubricant for open gear drives
Because of its unique chemical composition based on an aluminium soap thickener, the GRAFLOSCON C-SG 0 ULTRA provide good adhesion that protects the tooth flank even at extreme loads.The life of the gear is enhanced by the presence of fine graphite particles that form a protective layer and prevent damage.
The vibrations and temperature difference across the tooth flank are reduced. The gears are also protected against corrosion due to the special additives.

Kluberlub BE 41-1501

Heavy-duty grease for highly-loaded rolling bearings operating at low speeds
Kluberlub BE 41-1501 is designed to meet the requirements of rolling bearings subject to extreme conditions.
FAG FE 8 tests have confirmed the effectiveness of Kluberlub BE 41-1501 under these conditions and it is approved by various bearing manufacturers, e.g. FAG, to be used for applications in low-speed rolling bearings subject to very high loads and shocks, for example in roller presses and bowl mill crushers.

Klubersynth UH1 6-320

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

$Kluberoil Tex 1-22 N$

Kluberoil Tex 1-22 N

Anti-wear, biodegradable needle and sinker oils
In the knitting industry, requirements in terms of consistent product quality, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluberoil Tex 1-...N oils are special mineral base oils and additives. These oils are biodegradable according to OECD - 301 c.
These oils reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Technical service

Supervising installation of Aumund equipment

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: [email protected]

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416