High-temperature long-term greases
BARRIERTA is Europe's oldest high-quality brand of high-temperature lubricants based on PFPE. Today the name of BARRIERTA is widely regarded as synonymous with long-term stability and thermal resistance.
We are committed to live up to this good reputation. BARRIERTA L55 series products are made from clearly specified raw materials and the production and quality of the end product is closely monitored.
BARRIERTA L series long-term greases offer excellent resistance to high temperature and aggressive media and at the same time compatibility with plastics and elastomers.

Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.

Synthetic sealing grease for the food-processing and pharmaceutical industries
Klubersynth UH1 64-2403 has been especially developed for the food-processing and pharmaceutical industries. Klubersynth UH1 64-2403 is resistant to hot and cold water and does not impair the formation of froth or the taste of beer.
Klubersynth UH1 64-2403 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. In addition this grease is Halal certified (HFCE) and related drinking water certificates such as UBA (DVGW-KTW), WRAS and NSF Standard 61 are available.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.

Special lubricating grease for valves eg under vacuum
BARRIERTA L 55/3 HV is a synthetic, non-flammable and pasty sliding agent with good wetting properties for high-performance valves. It is based on PFPE oil and PTFE and can be used for temperatures from -25°C to 260°C.
BARRIERTA L 55/3 HV is a special grease for valves offering a long-term effect when exposed to hot water, boiling water, and steam.
BARRIERTA L 55/3 HV is resistant to chemicals and aggressive media such as concentrated acids, alkaline solutions and organic solvents (except for fluorinated hydrocarbon solvents, strong, bases, earth/alkali metals and Lewis acids). BARRIERTA L 55/3 HV is almost neutral to elastomers and plastics.

Fully synthetic lubricating and sealing grease for valves and fittings
NOSOL GBY 2 is a fully synthetic lubricating and sealing grease for valves and fittings, especially gas fittings and bearings. It is resistant to water, mineral oil, glycol-water mixtures, gaseous and liquid aliphatic hydrocarbons such as town gas, long-distance gas, natural gas, petroleum gas and their substitute gases as well as to propane and propane-butane mixtures.