Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.

Air-drying, easy-to-apply bonded coating based on MoS₂
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS₂), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating oil for use in the food and pharmaceutical industries
PARALIQ 91 Spray is a food-grade lubricating oil based on a ester oil which has been developed as release agent for tins, moulds, cutting boards and other solid surfaces in contact with foodstuffs. It is neutral in odour and taste.
It is NSF H1, 3H registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries...

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.