Lubricating greases for extreme requirements
Kluberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano-dynamical loads and good adhesion properties. Kluberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for drinking water taps
Klubersynth V 64-300 is a special lubricating grease based on a synthetic oil with a low content of silicone oil and an inorganic thickener.
This product complies with the recommendations pertaining to synthetic materials in contact with drinking water set forth by the German Health Authority. It has a high load-carrying capacity and excellent wetting properties.
Klubersynth V 64-300 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Special lubricating grease for valves eg under vacuum
BARRIERTA L 55/3 HV is a synthetic, non-flammable and pasty sliding agent with good wetting properties for high-performance valves. It is based on PFPE oil and PTFE and can be used for temperatures from -25°C to 260°C.
BARRIERTA L 55/3 HV is a special grease for valves offering a long-term effect when exposed to hot water, boiling water, and steam.
BARRIERTA L 55/3 HV is resistant to chemicals and aggressive media such as concentrated acids, alkaline solutions and organic solvents (except for fluorinated hydrocarbon solvents, strong, bases, earth/alkali metals and Lewis acids). BARRIERTA L 55/3 HV is almost neutral to elastomers and plastics.

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.

Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.