White lubricating and assembly paste for the food-processing and pharmaceutical industries
Kluberpaste UH1 84-201 is a white lubricating and assembly paste for versatile lubricating and assembly purposes in hygienically sensitive environments.
The lubricant is water-resistant and provides good corrosion protection.
The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Light-coloured high-pressure lubricating paste
Kluberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives.
This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.

High-temperature lubricating paste
Wolfracoat C is a grey high-temperature lubricating paste containing metal solid lubricant pigments (e.g. copper, graphite). Wolfracoat C counteracts excessive friction, wear and seizing at lubricating points subject to high loads. Wolfracoat C forms a thermally stable lubricating film. At temperatures above 200 °C, the solid lubricants remain in the friction points and protect against tribocorrosion and fretting of e.g. fits up to 1200 °C.

Lubricating and assembly paste
Klüberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.
 

High-temperature and high-purity screw paste
In many chemical processes, contaminants like halogens, metal compounds and sulphur can cause undesirable secondary reactions. Therefore, lubricants used in the vicinity of such processes for e.g.flange connections in reactors should be free of such substances. Kluberpaste HS 91-21 complies with this requirement, as it offers a high degree of purity regarding sulphur, chlorine, fluorine and heavy metals.