Special paste for lubrication of plastic materials and prevention of stick-slip and noise
Kluberpaste R 11-502 is a special paste containing solid lubricants used for the lubrication and noise-prevention in plastic-plastic material pairings, e.g. in sliding or dampening elements made of thermoplastics, and in particular POM-POM pairings.
Due to the carefully designed combination with solid lubricants, the difference between static and sliding friction is minimised, which enables this paste to prevent creaking noises even in relatively elastic materials like plastics, and even under high loads.

High-temperature and high-purity screw paste
In many chemical processes, contaminants like halogens, metal compounds and sulphur can cause undesirable secondary reactions. Therefore, lubricants used in the vicinity of such processes for e.g.flange connections in reactors should be free of such substances. Kluberpaste HS 91-21 complies with this requirement, as it offers a high degree of purity regarding sulphur, chlorine, fluorine and heavy metals.

Light-coloured high-pressure lubricating paste
Kluberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives.
This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.
 

Lubricating and assembly paste
Klüberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.