Low-noise rolling bearing grease for long-term lubrication
Kluberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Kluberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings

Lubricating grease for high temperatures and speeds
Kluberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Kluberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures. Kluberalfa BF 83-102 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Fully synthetic high-performance oils for high-speed can closing machines
The Kluberfood NH1 M 4-100, -150, -220 oils are mineral oil-free products based on synthetic hydrocarbons.
Klüberfood NH1 M 4-100, -150, -220 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. In addition to their good anti-corrosion properties, Klüberfood NH1 M 4-series has a very good oil and water absorption behaviour.

Spindle bearing grease
ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.

High-speed lubricating grease
Kluberspeed BF 72-22 is a high-performance special grease with a synthetic base oil and a polyurea thickener. The base oil viscosity and its viscosity-temperature characteristics allow Kluberspeed BF 72-22 to be used for a wide range of speeds and temperatures. Tests have shown that Kluberspeed BF 72-22 is suitable for extremely high speeds; speed factors of up to 2 million were attained. Kluberspeed BF 72‑22 also allows shorter running-in times and has a long service life.