Special cleaning grease for rolling bearing applications
For you as an operator of wind power plants, downtime means high costs and laborious maintenance. Downtime is often due to rolling bearing damage caused by hardened residues. Klubersynth BZ 68-400 is a solution destined precisely for this problem. As the cleaning grease removes these residues, bearing life is extended and downtime for maintenance reduced.
When developing Klubersynth BZ 68-400, particular care was taken to ensure it is compatible with other base oils for maximum versatility. Besides the good cleaning effect that removes residues from rolling bearings, Klübersynth BZ 68-400 offers good protection against wear and corrosion. Due to this combined effect, cleaning of the rolling bearings can take place during operation.

Speciality rolling bearing grease for demanding applications
In wind turbine generators, the lifetime of rolling bearings and service intervals can be extended with the right lubricant. Kluberplex BEM 34-131 N is a long-term lubricating grease offering high load-carrying capacity and very good corrosion protection. Also during downtime. Kluberplex BEM 34-131 N enables long grease life and is compatible with various lubrication systems.

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Eco-compatible operating lubricant for open gear drives
Kluberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.
The high-viscosity base oil of Kluberbio LG 39-701 N comes from 100 % renewable resources.
Kluberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.
Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30°C and sprayed even below 0°C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity.