xoc dia doi thuong - Trang cá cược uy tín

Paraliq GA 351

Manufacturer: KLÜBER LUBRICATION (Germany)

Special lubricating grease for the food and pharmaceutical industries
PARALIQ GA 351 is a versatile lubricating grease based on an aluminium complex soap thickener.
It has no smell or taste. It is resistant to all aqueous or alcoholic media commonly found in the food industry.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food, cosmetics, pharmaceutical industries.

Benefits for your application

Versatile lubricating grease reducing the number of different lubricants required on site
Reduced loss of lubricant due to its resistance to aggressive media
Increased process reliability due to excellent hot water resistance
ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

Orther products

Product

Features, Application

Kluberlectric KR 44-102

Special grease for the lubrication of electrical switches, contacts and sensors
Kluberlectric KR 44-102 is a special grease for the lubrication of electrical switches, contacts and sensors. It consists of a PAO oil and lithium soap incorporating a UV indicator for quality inspection. It is intended especially for the protection and lubrication of copper, tin and silver surfaces against corrosion.

Klubersynth HBE 94-401

Synthetic heavy-duty grease for long-term lubrication
Klubersynth HBE 94-401 is a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used.

Petamo GY 193

Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings
PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection.
With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building.

Klubersynth BH 72-422

High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener.

This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.

Grafloscon C-SG 2000 Ultra

Operational lubricant for open drives
Grafloscon C-SG 2000 Ultra is a sprayable adhesive lubricant with a mineral base oil. It contains aluminium complex soap and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives, adhesion improvers and corrosion inhibitors. The raw materials used for the manufacture of Grafloscon C-SG 2000 Ultra are free of bitumen, solvents and chlorine.

Klubersynth UH1 14-1600

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

Technical service

Supervising installation of Aumund equipment

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

HANOI OFFICE

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: [email protected]

DA NANG OFFICE

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

HO CHI MINH OFFICE

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416