Graphite based operational lubricant for open gear drives
Because of its unique chemical composition based on an aluminium soap thickener, the GRAFLOSCON C-SG 0 ULTRA provide good adhesion that protects the tooth flank even at extreme loads.The life of the gear is enhanced by the presence of fine graphite particles that form a protective layer and prevent damage.
The vibrations and temperature difference across the tooth flank are reduced. The gears are also protected against corrosion due to the special additives.

Operational open gear lubricant for large girth gear drives
Kluberfluid C-PG 17 Ultra is based on an innovative synthetic base oil and was developed to meet your increasing demands of modern day open gears.
The high viscosity index of Kluberfluid C-PG 17 Ultra provides the highest film thicknesses and thus the highest load carrying capacity, even if your gears are running at elevated temperatures.
It exceeds the requirements of ANSI/AGMA 6014-B15 Annex D and FLSmidth Minerals Gear Set Lubrication Guidelines.

White operating and priming lubricants
Kluberplex AG 11- 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Operational lubricant for large girth gear drives
Kluberfluid C-F 3 Ultra is a lubricant of a new generation, developed specifically for the lubrication of medium-size to large girth gear drives. It is based on synthetic hydrocarbons and mineral oil. It provides good adhesion, excellent resistance to high pressure and protection against wear. This product is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 3 Ultra meets the requirements of ANSI/AGMA 9005-E02 annex D-2.

Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.