Semi-synthetic oil for chains in high humid process areas for the food-processing industry
Kluberfood NH1 C 8-80 is a semi-synthetic chain oil developed for the lubrication of chains operating in high humidity for conveyor and drive chains. Its formulation, incorporating a special additive package, enables significant friction reduction and good protection against wear and fretting corrosion particularly in the highly stressed pin / bush areas.
Kluberfood NH1 C 8-80 has good chemical stability for acidic process environments like in pasta dryer applications (lactic acid) where other oils may contribute to residue build-up.
Kluberfood NH1 C 8-80 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.

High-temperature chain oil
HOTEMP PLUS is a synthetic high-temperature chain oil for textile and plastic processing machines ensuring reliable operation even at high temperature and stress.
It creeps very well and thus rapidly forms a lubricating film.
Its specific additive combination makes HOTEMP PLUS is highly resistant to pressure and wear. Special adhesion improvers prevent the oil being thrown off the lubrication point.
HOTEMP PLUS is very efficient against the settling of finishing and softening compounds and their condensates at the point of friction. The few residues created by synthetic constituents are easy to regenerate by adding fresh oil.

High-temperature chain oils
All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.
Our synthetic ester oils clearly meet these requirements. With our Klubersynth CH 2 series, we have found the right solution for you.

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

Regenerative high-temperature chain oil for conveyor and transport chains in the food-processing and pharmaceutical industries
Kluberfood NH1 CH 2-460 is a synthetic high-temperature oil that can dissolve residues as fresh oil enters the circuit. Continuous minimum-quantity lubrication with this oil leads to longer chain life. The product's optimised thermal stability helps reduce lubricant consumption.
As thermal residues are regenerated, Kluberfood NH1 CH 2-460 can lead to lower maintenance and repair costs.
It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.