Regenerative high-temperature chain oil for conveyor and transport chains in the food-processing and pharmaceutical industries
Kluberfood NH1 CH 2-460 is a synthetic high-temperature oil that can dissolve residues as fresh oil enters the circuit. Continuous minimum-quantity lubrication with this oil leads to longer chain life. The product's optimised thermal stability helps reduce lubricant consumption.
As thermal residues are regenerated, Kluberfood NH1 CH 2-460 can lead to lower maintenance and repair costs.
It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.

Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Klubersynth CFH 2-400 was especially developed for film stretchers involving chain speeds of more than 450 m/min and oven temperatures in excess of 200°C. Over 40 years of cooperation and partnership with film stretcher OEMs such as Brückner Maschinenbau and operators has helped us build sound technical expertise in the development of high-temperature chain oils.
Klubersynth CFH 2-400 considerably reduces the formation and adhesion of residues in the chain system. As a result, the friction points can be supplied with sufficient lubricant for many months or even years. Moreover, machine availability increases due to a lower need for cleaning.

High-temperature oils for transmission, lifting and conveyor chains
The high-temperature oils of the Klubersynth CHM 2 series are manufactured on the basis of ester mixtures. These fully synthetic oils show good wear protection, low formation of residues (which are soluble in fresh oil) and high thermal stability. Their high lubricity increase operational reliability and extend the service life of machines.

Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230°C and 260°C.

High-temperature chain oil for the food-processing and pharmaceutical industries
Kluberfood NH1 CH 6-120 SUPREME is used to lubricate chains in industrial ovens operating at temperatures up to 650°C. The special carrier fluid conveys white solid lubricants to the friction point of the chain. The carrier fluid then evaporates without leaving organic residues. Therefore it helps to improve food safety in your plant. Kluberfood NH1 CH 6-120 SUPREME does not contain graphite, contamination with black particles is avoided.
Kluberfood NH1 CH 6-120 SUPREME is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.
Kluberfood NH1 CH 6-120 SUPREME offers good wetting properties and excellent penetration with high dispersion stability.